3.6 KiB
3.6 KiB
Readme
md5.exe
The md5.exe is a PC tool to make the output binary image file meets the requirement of MPTool.
Usage
md5 <filename>
Add md5 checksum to file name
Notes
MPTool requires the binary file names should be ended with -[md5sum], it will use md5sum to check whether the binary file is valid or not.
Examples
1. Add md5 checksum to Patch binary
D:\>md5 Patch.bin
Output Image: Patch-381b3b002cfa300054142e01c0332e01.bin
2. Add md5 checksum to APP binary
D:\>md5 app.bin
Output Image: app-381b6f00f4fc2c0054142e01c0332e01.bin
prepend_header.exe
The prepend_header.exe is a PC tool to manipulate the image header and make the output binary image file meets the requirement of OTA or MP.
Version
v1.0.0
Usage
prepend_header [/s,/c,/mp,/app_data,/dsp_data,/bkp_data1,/bkp_data2,
,/app_data0,/app_data1,/app_data2,/app_data3] <filename>
/s Generate SHA256 and then prepend the image header
/c Generate CRC16 and then prepend the image header
/mp Generate a new image with MP header
/app_data Generate and append header for BBPro APP data
/dsp_data Generate and append header for BBPro DSP data
/bkp_data1 Generate and append header for BBPro bkp data1
/bkp_data2 Generate and append header for BBPro bkp data2
/app_data0 Generate and append header for BEE2 APP data0
/app_data1 Generate and append header for BEE2 APP data1
/app_data2 Generate and append header for BEE2 APP data2
/app_data3 Generate and append header for BEE2 APP data3
Notes
All parameters are incompatible, do not use them at the same time
except "/s /mp".
The "/s" parameter also calculates CRC16, that is, CRC Check and
SHA Check would both succeed when doing OTA in BBPro.
The "/mp" parameter will firstly read the MP information from a
initialization file named "mp.ini", and then generate a new image
file with MP header according to it, and then read the image version
pattern if the version.h have defined it, the finally output file
name is "{Image_Name}_MP-{Major}.{Minor}.{Rev}.{Build}_{CommitID}-{md5}.bin".
The /app_data/dsp_data/bkp_data1/bkp_data2... parameter is used to
insert corresponding image header for BBPro/Bee2 data image.
Note that these parameters do not calculate CRC or SHA checksum,
thus after appending the data image header, please use this tool
again and pass "/c" or "/s" parameter according to your requirement.
Examples
1) prepend_header /s app.bin
Generate SHA256 and then prepend header of app.bin
2) prepend_header /c app.bin
Generate CRC16 and then prepend header of app.bin
3) prepend_header /mp app.bin
Generate a new image file with MP header, which name will be app_mp.bin
4) prepend_header /s /mp app.bin
Generate SHA256 and prepend header of app.bin, and then generate a new
image file with MP header, which name will be app_MP-{version&md5}.bin
5) prepend_header /app_data data.bin
prepend_header /c data.bin
Insert BBPro APP data image header and calculate CRC for data.bin
6) prepend_header /dsp_data data.bin
prepend_header /s data.bin
Insert BBPro DSP data image header and calculate SHA for data.bin
7) prepend_header /app_data1 data.bin
prepend_header /c data.bin
Insert Bee2 APP data1 image header and calculate CRC for data.bin